WIFI 5G 5000-6000MHz 20W Signal Jammer Anti Drone modules Generators

Shenzhen Texin Electronics Co.,Ltd is focused on research and development, production and sales of wireless communication technology since its established.

The product line includes mobile communications 2G/3G/4G/5G anti signal source and the GPS,WIFI anti module of wireless signal，as well as the smart equipment management of Lora system platform.We provide stable and reliable, good scalability and customized product for our customers with professional technology and excellent service.FPV anti signal source is a product of FPV anti module which is researched and developed by Texin Electronics.This Module use FPGA logic chip as the master control, combined with the excellent stable frequency of  locked frequency VOC, to create the anti FPV modulation signal module. The digital signal is generated by the internal of FPGA, which is modulated on a signal carrier wave with VCO oscillation frequency,the reaction process of the signal outputting to the amplifier and then transmitting to the antenna.

Product appearance and dimension:

Performance characteristics:

Supported frequencies:300-1200MHz, 2.4GHz,etc.

Output Power: 20W

Built in digital signal source, more convenient to use, high efficiency

Small dimensions, facilitate uses integration

Industrial grade application design, use industrial grade chips, suitable for industrial grade applications.

Product Specifications:

Function description:

1.basic function:

Its based on the FPV remote control frequency to set the digital modulate signal parameter of the anti signal source, modulate it to the customized frequency,the anti signal source after modulated which is amplified by RF and output to antenna for transmitting, forming a wireless signal to the anti FPV remote control signal.  

2. Application description:

The RF Output SMA port of the anti source signal module is 50Ωimpedance,connected to the amplifier module SMA input interface,the amplifier power module output is connected to the transmitting antenna, the interface and the impedance must be consistent.The Module’s temperature after integrated should be not exceed the working temperature, proper the heat dissipation.

Attentions:

1. Frequency range

No anti effect if out of the range of the using frequency when customized frequency correspond to anti FPV remote control signal.

2. Interference distance and output configuration

The interference distance is related to the output power of the amplifier. The larger power, the farther of the anti distance. Also the best effective should be achieved in unobstructed environment, which means there’s no unobstructed between the anti signal and the FPV.