Detection and Jammer Integrated Device

Product Description

Detection and jammer integrated device

As a professional Detection and jammer integrated device manufacturer, you can rest assured to buy Detection and jammer integrated device from our factory and Rongxin will offer you the best after-sale service and timely delivery.

CD-WRJ02 is an integrated equipment for detection and jammer. It can detecte drones in separate mode, detection and automatic jammer mode, which is convenient and simple in operation.

Detection and jammer integrated device

1. Detection and jammer integrated device introduction

Rongxin is one of the famous China Detection and jammer integrated device manufacturer and supplier. Our factory specializes in manufacturing of Detection and jammer integrated device.

CD-WRJ02 is an integrated device for drone detection and jamming. CD-WRJ02 can detect drones and automatic jamming. It’s detection principle is based on spectrum perception and artificial intelligence technology to identify and classify the flight control link and figure transmission link of drone.It with accurate frequency band and low false alarm rate.In order to achieve the protection of the key areas and prevent privacy leaks , CD-WRJ02 with narrow band interference technology and radio frequency suppression technology to cut off the connection between the drones and the remote control, After the drone was controlled, the image transmission channel was cut off , then the drone will not transmit video, aerial photos and can’t receive any instructions from the controller.

Detection and jammer integrated device functional characteristics

Detection principle	Itbased on spectrum perception and artificial intelligence technology to identify and classify the flight control link andfigure transmission link ofdrone.It can detect figure transmission type and frequency of drone.
Detection type	Detect DJI series drones,speedy beeand DIYfigure transmission drones, covering more than 97% of models on the market.
Multi-frequency band detection	Detect conventional frequency band(1.2GHz、2.4GHz-2.5GHz、5.2GHz-5.9GHz)models with figure transmission and it withlow false alarm rate.
Multi-frequency band strike	Without any external unit, it is highly integrated and integrated design, with the ability to attack drones that conventionally use remote control image transmission frequency bands such as 2.4GHz and 5.8GHz, and has the ability to interfere with GPS (can be expanded to other frequency bands).
Strong interference	In order to achieve better interference effect with the new drone Mavic3, we have carried out targeted design. By studying the technical specifications and working principles of Mavic3, we determined the targeted interference strategy.
Integrate detection and strike, unattended operation	The equipment is a fixed solution that can be installed at high altitudes. It adopts detection and automatic strike mode. It is unattended 24 hours a day and will automatically start countermeasure when a drone comes.
Pure strike mode	It can be used in purestrike mode. You only need to press the button in the selected frequency band,and the "blue light" will appear to indicate that it has started working. Press the button again,and the "blue light will go out" to indicate that it has stopped working.

Detection and jammer integrated device technology standard

Strike frequency band	1.2GHz 2400-2485MHz 5725-5850MHz
Strike distance	1km（Antenna gain 3dbi，DJ Mavic3）
Detection airspace	360°all airspace
Detection quantity	More than 100 pieces of UAV
Detection refresh time	3s
Continuous detection time	24 hours a day
Interfere frequency band	2.4G：2400-2485MHz 240W 5.8G：5725-5850MHz 100W
Interference mode	Drive away
Countermeasure distance	More than 1000 meters
Weight	25kg
Working hours	24 hours a day
Height for installation	Refer to the destination, 3m higher than the tallest building
Countermeasure angle	360°all airspace
Charging	220Vmains power
Control method	Automatically strike
Size	530410230 (without antenna)

Operation manual

First, screw on the corresponding antenna (countermeasure/detection antenna) then connect it to the 220V mains power.

After powering on, click the "Detection Switch" button to enter the detection mode. At this time, the "Detection Indicator" displays "green".

When a drone is detected, countermeasures will be automatically started. At this time, the "countermeasures frequency band button 2.4G and 5.8G buttons will light up blue", indicating that the countermeasures have begun to work (the factory setting countermeasures time is 120s). , the "detection indicator light" goes out.