How to use the anti drone equipment ?

UAV anti-drone equipment, also known as anti-drone equipment or UAV repelling controller, etc., uses the principle of same-frequency countermeasures to repel and shield UAVs.  The UAV countermeasure equipment can shield all positioning and navigation signals, including: GPS/GLONASS/Galileo, etc., and counter-interference the commonly used remote control image transmission 2.4G and 5.8G frequency bands.

How to use?

1. Positioning signal interference: Shield the satellite navigation signal, turn on the GPS switch, the corresponding indicator light is on; pull the trigger and hold it, the indicator light is on, and aim at the drone.  Some foreign scenarios require GPS L1 and L2 interference at the same time.

 2. Remote control image transmission signal interference: interfere with the remote control image transmission signal, turn on the 2.4G and 5.8G switches at the same time, and the corresponding indicator light will light up; pull the trigger and hold it, the indicator light will be on, and aim at the drone.  Some foreign drones require 900M and 1.2G simultaneous interference, etc.

 3. Simultaneous interference with remote control and image transmission: Turn on the GPS, 2.4G, and 5.8G switches at the same time, and the corresponding indicator light will be on; pull the trigger and hold it, the indicator light will be on, and aim at the drone.  Some foreign UAV countermeasure equipment requires 6 frequency bands.